1 /
1
1500G-12000G RO Reverse Osmosis System
-
The global RO series, ranging from 1500 to 12000 GPD, is designed and tested for easy installation. Utilizing the highest quality components and advanced system design ensures the safety of the water quality system.
Product Features-
Powder Coated Oven for Housing + Easy Maintenance with Stainless Steel Frame
-
RO Membrane Using 4040 Membrane Tubes
-
Stainless Steel High-Pressure Motor
-
RO Housing Made of Stainless Steel 304/306
-
High-Pressure Pipes or FRP Pipe Shell
-
Control System with Microcomputer Control
-
TDS LCD Display Controller, Capable of Showing Water Quality Status and Automatic Detection
-
Low Water, Water Production, and Full Water Protection Devices
-
High-Quality Solenoid Valve with Water Cut-off and Automatic Flushing Functions
-
High-Pressure Nylon Fittings
Operating Specifications
- Inlet Temperature: 85°F
- Inlet Pressure: 35 psi - 85 psi
- PH Range: 4 - 12
- Turbidity: Must remove SDI < 5
- Iron: Maximum Allowable Error 0.5 ppm (only in dissolved form)
- Hardness: Soften if over 10 GPG
- Hydrogen Sulfide: 98%
- Electrical: 110V 60Hz (50Hz available upon request) / 220-440V 60Hz (50Hz available upon request)
-
-
*Testing Conditions: Working Pressure 200 psi, Design Temperature: 77°F (25°C), Membrane: Composite Membrane
-
System introductionThe global RO series, ranging from 1500 to 12000 GPD, is designed and tested for easy installation. Utilizing the highest quality components and advanced system design ensures the safety of the water quality system.
Product Features-
Powder Coated Oven for Housing + Easy Maintenance with Stainless Steel Frame
-
RO Membrane Using 4040 Membrane Tubes
-
Stainless Steel High-Pressure Motor
-
RO Housing Made of Stainless Steel 304/306
-
High-Pressure Pipes or FRP Pipe Shell
-
Control System with Microcomputer Control
-
TDS LCD Display Controller, Capable of Showing Water Quality Status and Automatic Detection
-
Low Water, Water Production, and Full Water Protection Devices
-
High-Quality Solenoid Valve with Water Cut-off and Automatic Flushing Functions
-
High-Pressure Nylon Fittings
Operating Specifications
- Inlet Temperature: 85°F
- Inlet Pressure: 35 psi - 85 psi
- PH Range: 4 - 12
- Turbidity: Must remove SDI < 5
- Iron: Maximum Allowable Error 0.5 ppm (only in dissolved form)
- Hardness: Soften if over 10 GPG
- Hydrogen Sulfide: 98%
- Electrical: 110V 60Hz (50Hz available upon request) / 220-440V 60Hz (50Hz available upon request)
-
-
Specification Sheet*Testing Conditions: Working Pressure 200 psi, Design Temperature: 77°F (25°C), Membrane: Composite Membrane